What is the meaning of 195 55 R16 87V?
The speed rating is the last letter out of the digits on your tyre. Let’s say your tyre shows: 195 / 55 / R / 16 87V The speed rating would be “V. The last two digits before the letter is the load index, so it would be “87. A tyre with a load index of this amount can carry 545kg. Take, for instance, the specification ‘195/55 R16 87V. While most people recognize the width, height, rim diameter, and load aspect, the alphabet ‘V’ at the end holds a specific meaning. In this case, ‘V’ denotes that the tyre can reach speeds of up to 240 km/hr.R stands for “Radial” and the last two figures 16 indicate the wheel diameter in inches. The size ends with the load index 87, which is the maximum weight that each wheel can support, and the speed rating H, which is the maximum speed at which the tyre is approved for use.This is the size and characteristics of the tyre 195: This is the section width of the tyre. That means the overall width of the tyre in mm. This is the aspect ratio of the tyre. That is the sidewall height of the tyre as a percentage of the section width. R: This mean the tyre is of Radial construction.R stands for “Radial” and the last two figures 16 indicate the wheel diameter in inches. The size ends with the load index 87, which is the maximum weight that each wheel can support, and the speed rating H, which is the maximum speed at which the tyre is approved for use.
Can I fit H-rated tyres instead of V?
Can I fit tyres with a lower speed rating? No, you should NEVER do this. Using a tyre with too low a speed rating for the car increases the risk of tyre failure at high speeds. Never drive tyres with different speed ratings. It will cause steering and handling issues and you may even lose grip. Follow the legal speed limit always.Decoding tyre specifications take, for instance, the specification ‘195/55 r16 87v. While most people recognize the width, height, rim diameter, and load aspect, the alphabet ‘v’ at the end holds a specific meaning. In this case, ‘v’ denotes that the tyre can reach speeds of up to 240 km/hr.What Tire Speed Rating Do You Need? Even in states where rural speed limits are 75 mph, most drivers will stay well below the speed limitations of H-rated tires. Commuters and family car drivers will likely be quite satisfied with S or T tires.Tire speed rating V For example, if the tire has a speed rating of V, then the maximum speed it can sustain is 149 mph (240 km/h).
Is V tire rating good?
SPEED RATING V Once the highest speed rating a tire could have, “V” used to represent a maximum of 149 mph (240 kph) or more. Nowadays, it means 149 mph but no higher. H vs V rated tires cater to different preferences—H offers excellent comfort and durability, perfect for daily drives. At the same time, V provides enhanced grip and sporty handling for those who love a performance boost.H-rated tires only allow you to rev up within a maximum range of 130 mph. In comparison, V-rated ones extend the performance of tires up to 149 mph. The distinction comes from the theoretical aspect of speed and the driving experience. One thing is certain: swapping the two is not good for the vehicle or the driver.H-rated tires only allow you to rev up within a maximum range of 130 mph. In comparison, V-rated ones extend the performance of tires up to 149 mph. The distinction comes from the theoretical aspect of speed and the driving experience. One thing is certain: swapping the two is not good for the vehicle or the driver.This means that a tire with a V-rating, for example, can be driven at 149 miles per hour until it wears out! Less frequently seen ratings are Q 99 mph and R 106 mph- used in some light truck tires. The W rating replaced what was once Z, which was anything above 149 at the time, and is now limited to 168 mph.
What does 88V mean on a tire?
The size ends with the load index 88, which is the maximum weight that each wheel can support, and the speed rating V, which is the maximum speed at which the tyre is approved for use. The speed rating is the last letter out of the digits on your tyre. Let’s say your tyre shows: 195 / 55 / R / 16 87V The speed rating would be “V. The last two digits before the letter is the load index, so it would be “87. A tyre with a load index of this amount can carry 545kg.For example, a tyre that reads 255/40 R20 101V shows V to be the tyre speed rating. The tyre speed rating chart below shows that V corresponds to 149 mph. Therefore, tyres with this speed rating should not be driven over 149mph.The speed rating is the last letter out of the digits on your tyre. Let’s say your tyre shows: 195 / 55 / R / 16 87V The speed rating would be “V. The last two digits before the letter is the load index, so it would be “87. A tyre with a load index of this amount can carry 545kg.This index is a combination of a number followed by a letter. For instance, the index “91V” indicates a maximum speed of 240km/h (based on a table), and the letter “V” is an alphabetical index, by which A indicates the lowest and Y the highest speed class.
What does V mean on a tire?
Each letter coincides to the maximum speed a tire can sustain under its recommended load capacity. For instance, V is equivalent to a maximum speed of 149 mph. Even though a tire can perform at this speed General Tire does not advocate exceeding legal speed limits. This means that a tire with a V-rating, for example, can be driven at 149 miles per hour until it wears out! Less frequently seen ratings are Q 99 mph and R 106 mph- used in some light truck tires. The W rating replaced what was once Z, which was anything above 149 at the time, and is now limited to 168 mph.So, what does tyre rating W mean? Essentially, it means that your tyres will be able to handle a specific maximum speed while carrying a load. Typically, tyres with a W rating can handle a maximum speed of 168 mph.
What is H or V on tyres?
H: 130mph. V: 149mph. Z: 150+mph. W: 168mph. Y: 186mph. V – Up to 149 mph. W – Up to 168 mph.These are speed ratings . H means it’s safe up to 130 MPH and the T means it’s safe up to 118 MPH.