What is the difference between 11R22 5 and 11r24 5?
The maximum single load of 11R22. According to various manufacturers’ load and inflation tables, a typical standard-profile 11R22. LRG tire needs 105 psi to get beyond 12,000 pounds load carrying capacity. For example, Michelin’s tables indicate a pair of such tires would be good for 12,350 pounds (6,175 pounds each).
Are 11R22 5 tires the same as 295/75R22 5?
The 295/75R22. R22. The bigger the aspect ratio, the higher/taller the tire’s sidewall, or “profile” as it’s sometimes called. The aspect ratio is indicated on the tire sidewall as a percentage. It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width.The section height is the height of the tire measured from the rim to the outer edge of the tire; the section width is the width from sidewall to sidewall. A tire with the code xxx/65 indicates that the section height of the tire is 65% of its width.For example in the tire size 225/70/R16, the number 70 is the aspect ratio. It also means the tire height is 70% of the tire width. The last number in the tire size is the diameter of the wheel on which the tire is installed. For example in the tire size 225/70/R16, the number 16 is the wheel diameter in inches.Section width in inches. R = Radial Tire. Rim diameter and rim type. Rims with . The 15-degree bead seat is a specific design feature of certain tire rims. The tire size 11R22. This is a common standard for radial tires used in commercial vehicles.Rim diameter and rim type. This tyre was designed for light trucks and vans. The 24. It is designed for use with heavy trucks and larger vehicles.Both will have an aspect ratio of 88%, so the sidewall height of the 10R22. R22. R22. Based on the above we can calculate that the 10R22. R22.