What does 235 65r17 104H mean?
The size ends with the load index 104, which is the maximum weight that each wheel can support, and the speed rating H, which is the maximum speed at which the tire is approved for use. The ‘104’ in this designation refers to the load index of the tire, indicating its maximum carrying capacity under normal inflation conditions. Specifically, a tire marked with 104 can support up to 900 kilograms (approximately 1984 pounds).T and 102H are service descriptions. Load Index, what this means is, the tire is capable of carrying weight up to, 1,874 lbs per tire. The T and H are speed Ratings, this indicates that a tire is capable of speeds up to, 118 mph and 130 mph (respectively).When it comes to Light Truck (LT) or Special Trailer (ST) tires, there are two load indexes branded (example – LT235/75R15 104/101S). In this example, the 104 corresponds to 1,984 pounds (see chart below), and the 101 corresponds to 1,819 pounds.
What does 235 60 r18 103H mean?
The 235/60R18 103H tire has the following features: the first three digits refer to the width of the tire in millimetres. The second two-digit number refers to the ratio between the height of the sidewall and the width of the tire. R stands for “Radial” and the last two figures 18 indicate the wheel diameter in inches. You should only use tyres with speed ratings that are recommended by your manufacturer. Mixing tyres on your vehicle isn’t just inadvisable, it can be dangerous.Running a tire at speeds higher than its rating can shorten the tire’s life and potentially lead to a tire damage which could result in an accident, so it is important to follow the manufacturer’s speed rating recommendations when you are choosing tires.H-rated tires are thoroughly tested to safely handle speeds up to 130 mph, while V-rated tires show reliable performance at sustained speeds up to 149 mph, which is an important distinction for vehicles that travel at higher speeds.The ‘103-H’ on a tire indicates its load index and speed rating. The ‘H’ speed rating signifies a maximum speed of 130 mph (210 km/h).
What does 104H mean on a tire?
Take ‘104H,’ for instance—what does it really signify? The number ‘104’ refers to the tire’s load index, which indicates how much weight each tire can support when properly inflated. Specifically, a load index of 104 means that this tire can carry up to 2,094 pounds (or about 950 kilograms). The size ends with the load index 104, which is the maximum weight that each wheel can support, and the speed rating H, which is the maximum speed at which the tire is approved for use.For example, “H” would translate to a tire that can only handle speeds up to 130 mph (or 210 km/h).
What does 104s mean on a tire?
Our 104 index means this tire is capable of supporting a 1,984-pound load, as compared to a 70 (739 pounds) or 126 (3,748 pounds). The speed ratings range from “L” (75 mph) through “Z” (149 mph or greater). The “greater” the letter designation, the higher the speed rating. Our “S” rating is equivalent to 112 mph. The ‘Z’ indicates that the tyre can safely operate at speeds higher than 150 mph. This is in addition to its normal speed rating (see below). Your tyre will not have this ‘Z’ if it’s rated for a speed lower than 150 mph.Letters ranging from A to Z represent the speed rating. Each letter denotes the maximum speed a tyre can sustain under its recommended load capacity. In our example, “H” is equivalent to a maximum speed of 130 mph (209 kph).
What does H mean in tire size?
Higher speed ratings, like H or ZR, can handle far beyond a normal highway speed. For example, “H” would translate to a tire that can only handle speeds up to 130 mph (or 210 km/h). Finally, a few tire manufacturers recommend outright tire replacement, as they will not accept repaired tires for warranty consideration or do not endorse repair of V-, Z-, W- or Y-speed rated tires.Can tires rated H (130 m. V (more than 130 m. Z (more than 149 m. Yes, with some reservations. Fearing lawsuits if a motorist has an accident, many tire dealers and service-station tire technicians will not repair a speed-rated tire though tests have proven such repairs are safe.
What does H or V mean on tyres?
Should I buy H or V rated tires?
H-rated tires are thoroughly tested to safely handle speeds up to 130 mph, while V-rated tires show reliable performance at sustained speeds up to 149 mph, which is an important distinction for vehicles that travel at higher speeds. Shane N. Primarily, you should avoid mixing different tire brands and different tread patterns. There are rare exceptions for approved mixed-tire fittings, but in general, manufacturers do not recommend tire mixing at all.If you’re replacing tires and think you may want a lower- or higher-speed-rated tire, it’s best not to mix and match. When mounting differently rated tires, techs prefer to put the lower-speed-rated tires on the front to prevent oversteering.If you’re replacing tires and think you may want a lower- or higher-speed-rated tire, it’s best not to mix and match.Using tyres with different speed ratings can also cause uneven wear and tear on the tyres, leading to a shorter lifespan and potentially compromising the safety of the vehicle. The only exception to this is a winter tyre.