What does 215-60 R17 96H mean?
Tyre size example: 215/60 r17 96h width: 215 millimetres. Aspect ratio: 60% (the sidewall height is 60% of the width) construction: radial. Rim diameter: 17 inches. Load index: 96 (maximum load of 710 kilograms per tyre) ever looked at your tire and thought, “what do these numbers even mean? Let’s decode it together: example: 225/60 r17 99h 🔸 225 – tire width in millimeters 🔸 60 – aspect ratio (sidewall height as % of width) 🔸 r17 – radial tire, fits a 17-inch rim 🔸 99h – load index & speed rating understanding this helps you buy the .
What does 215-60 r16 95h mean?
Aspect Ratio, it is the ratio of the sidewall height to the cross section width. The 215 means 215 mm wide. The 65 is a percentage meaning 65% of the 215 mm width.
What is T and H in tyres?
The most common tyre speed ratings for standard passenger cars are S, T, and H. S corresponds to a maximum speed of 112mph (180 km/h), T corresponds to a maximum speed of 118mph (190km/h), and H corresponds to a maximum speed of 130mph (210km/h). It is generally not recommended to mix tyres with different speed ratings on your vehicle. It can lead to uneven performance, especially at higher speeds. But if you absolutely have to do it, make sure the tyres with the higher speed rating go on the rear axle.The choice between H and T tires is actually based on speed ratings: while H-rated tires allow a top speed of 130 mph, delivering superior handling and heat resistance. T-rated tires max out at 118 mph and thus favor durability and comfort for everyday use.If you’re replacing tires and think you may want a lower- or higher-speed-rated tire, it’s best not to mix and match. When mounting differently rated tires, techs prefer to put the lower-speed-rated tires on the front to prevent oversteering.Using tyres with different speed ratings can also cause uneven wear and tear on the tyres, leading to a shorter lifespan and potentially compromising the safety of the vehicle. The only exception to this is a winter tyre.
What does 96H mean on tyres?
Special codes consisting of letters or letters and numbers are used to indicate its value. Each determines a different permitted speed. For example, the speed index H in code 225/50 R16 96H represents the maximum permitted speed of 210 km/h. H-rated tires are thoroughly tested to safely handle speeds up to 130 mph, while V-rated tires show reliable performance at sustained speeds up to 149 mph, which is an important distinction for vehicles that travel at higher speeds.For example, a tire marked with “P225/60R16 95H” has a speed rating of “H,” which corresponds to a maximum speed of 130 mph (210 km/h).According to the chart below, tires with this marking are good for speeds up to 149 mph (240 km/h).The choice between H and T tires is actually based on speed ratings: while H-rated tires allow a top speed of 130 mph, delivering superior handling and heat resistance. T-rated tires max out at 118 mph and thus favor durability and comfort for everyday use.
What is H or V on tyres?
H: 130mph. V: 149mph. Z: 150+mph. W: 168mph. Y: 186mph. Look up the spec for your vehicle. H = 130 mph V = 149 mph. If the price is the same just get the V.
What is the tyre pressure for 215 60r17 96H?
Its depends on the load of your car: Upto 3 person 33 psi Upto 5 person it is 35 psi company recommended. However,you will feel good if you always keep this pressure with Nitrogen. Normal air you can fill upto 30 for less load and full load 33 as air will expand with heat. But you shouldn’t go too much over recommended PSI. You can safely over-inflate tires by up to 10%. For example, if your tires have a recommended PSI of 35, you can go up to around 38 PSI without worry. Anything more than that is too much and not recommended.No, for most cars a tire pressure of 40 psi is too high. You might find 40 psi suitable for some vehicles, especially if they’re carrying heavier loads or if the manufacturer’s recommendation is close to that figure. However, it’s generally too high for most passenger cars, which usually recommend between 30-35 psi.No, for most cars a tire pressure of 40 psi is too high. You might find 40 psi suitable for some vehicles, especially if they’re carrying heavier loads or if the manufacturer’s recommendation is close to that figure. However, it’s generally too high for most passenger cars, which usually recommend between 30-35 psi.