Can I put air in my tyre after using tyre weld?
This will seal the puncture, and your tyre will be safe to drive on. It won’t deflate and Tyreweld won’t damage it in any way. We only advise that you top up the pressure at the earliest opportunity and drive at a maximum of 50mph/80kph. Tyreweld works on a range of small punctures, sealing and reinflating the tyre in around two minutes.Potential Damage One of the major drawbacks of using a sealant is that it can create a high-pressure environment inside the tyre, which can be dangerous to the person repairing it. Additionally, liquid tyre sealants are limited in terms of the size of holes or punctures they can fix.A tire sealant provides a quick and effective solution to fix punctures, allowing you to get back on the road without waiting for roadside assistance or struggling with a spare tire.Tyreweld provides a simple solution, sealing and reinflating the tyre in a matter of minutes and allowing you to drive for up to 100 miles.In any case, it is recommended that you have the tyre repaired or replaced at the earliest opportunity after the sealant has been applied and you do not continue to drive the vehicle other than to reach your nearest tyre fitting centre.
Does tyre weld damage tyres?
IMPORTANT: Tyreweld is a water based foam which won’t damage your tyres in any way and can be wiped out of tyres easily. What the experts say… “Unlike some of our competitors, Holts Tyreweld does not damage your tyres. After using Tyreweld, the puncture can be repaired according to the British standard BS AU159:f.Here’s the good news: a properly applied tire patch can last for the remaining life of the tire. In other words, if your tires still have 40,000 miles of tread left, the patch should hold up for that long.Tyre sealant is intended as a temporary fix, not a permanent repair. The longevity of a sealant repair depends on the size of the puncture, where it is, and the type of sealant used. In general, you can expect it to last around 50 to 100 miles, just enough to get you safely to a tyre garage.Yes, a tyre can be repaired after it has been sealed with tyre sealant. However, the tyre must be properly inspected and repaired by a professional.
Is tyre weld bad?
The water based foam seals punctures and won’t damage your tyres in any way. It can be wiped out of tyres easily, so a mechanic can repair the puncture permanently. You should tell your mechanic before they remove the tyre that you’ve used Tyreweld and that it can be cleaned out. Tyre foam can be a temporary fix for a puncture but only lasts for 50-100 miles. Tyre sealant is easy to use and contains chemicals and latex and newer solutions can be water-soluble, non-toxic and non-flammable.The water based foam seals punctures and won’t damage your tyres in any way. It can be wiped out of tyres easily, so a mechanic can repair the puncture permanently. You should tell your mechanic before they remove the tyre that you’ve used Tyreweld and that it can be cleaned out.Tyreweld works on a range of small punctures, sealing and reinflating the tyre in around two minutes. Tyreweld will not work on tyres that have come off the rim or have a punctured/ripped sidewall.One of the best things about Holts Tyreweld is that it can be washed out of a tyre after use, so it can be repaired. Not all car puncture repair kits can guarantee this.
How long will tyre weld last?
Tyreweld provides a simple solution, sealing and reinflating the tyre in a matter of minutes and allowing you to drive for up to 100 miles. After using Holts Tyreweld, you can drive for up to 100 miles at a maximum speed of 50 mph to reach a garage for a permanent repair.DRIVE UP TO 100 MILES: Get yourself straight back on the road with this Tyre Sealant Kit – you can drive for up to 100 miles before getting the tyre professionally checked, driving at a maximum of 50mph, giving the solution time to circulate.