What size is a 215 70R15 tire?
R15 tires have a diameter of 26. The sidewall of the tire is 5. This means a 215/70R15 tire will make make 750 revolutions per mile, or 466 revolutions per kilometer.Converting these measurements to inches helps in visualizing the difference more clearly. A 215 tyre converts to approximately 8. This means that the 225 tyre is slightly wider than the 215 tyre, albeit the difference may seem subtle on paper.
Which tire is taller, 65 or 70?
These numbers show the aspect ratio, which is the tire sidewall height in percentage to width of the tire. The width of Sidewall is directly proportional to the aspect ratio, a 70 aspect ratio means the sidewall height is 70% of 265mm while 65 aspect ratio means it is 65% of 265mm. Tire Size. The tire size is the largest number on the sidewall and is usually in a format like 215/65R15. In this example, 215 is the width of the tire in millimeters from sidewall to sidewall. The number after the slash, 65, is the aspect ratio, which is the height of the sidewall as a percentage of the width.The first number in the tire size, 215, represents the width of the tire in millimeters. To convert this to inches, we divide 215 by 25. This gives us approximately 8.
What is the tire pressure for 215 70 15?
R15 is a Metric tire that comes in a Standard Load (SL) range and an Extra Load (XL) range. Standard load (SL) size has a load index of 98 with a maximum load capacity of 1653 lbs at 36 psi, capable of supporting up to 1653 pounds when inflated to its maximum air pressure of 36 pounds per square inch. LT tires are a good choice due to their reinforced construction and higher load capacity if you use your truck for towing, hauling heavy loads, or off-road driving. However, P-metric tires might suffice if you primarily use your vehicle for everyday commuting or light duties.LT-metric tires, they may not be suitable for replacing O. E. P-metric tires because of the ride harshness that results from higher PSI requirements. Load Comparison Example, P vs. LT: P245/75R16 109 Max Load = 2,271 lbs @ 35 PSI In order to carry the equivalent load, a LT245/75R16 LRC must be inflated to 50 PSI.
What does 75 R mean on a tire?
The next number after the slash mark is the aspect ratio, which is the height of the sidewall as a percentage of the width. A smaller aspect ratio means a shorter sidewall for better handling, while a larger ratio provides a smoother ride. The final letter is the tire construction, with R meaning it’s a radial tire. The letter R means the tyre is a radial construction.The D in 75D15 stands for diagonal or bias ply, indicating that the tire’s internal fabric layers are diagonally arranged, while the R in 75R15 stands for radial, meaning that the tire’s internal fabric layers are arranged radially from the center.