What is the tyre pressure for a 215 65 16 van?
Please see the typically recommended tyre pressures for specific wheel sizes, below: 205/65 r16c 103/101 t – 4. Bar / 61psi. R16c 102/101t – 3. Bar / 51psi. R16 104t – 3. Bar / 45psi. Typically, if the recommended pressure levels are 35, then the tires should not use more than 40 psi. More than that will result in the before mentioned problems.However, it’s generally too high for most passenger cars, which usually recommend between 30-35 psi. Always check the car maker’s recommendations for the exact figures. Keeping your tires at the correct pressure ensures better gas mileage, safer handling, and longer tire life.Because of their heavier loads and towing capacities, vehicles such as UTEs, vans, trucks, and 4x4s require higher tire pressures. These vehicles can handle pressures up to 45 psi.Tire pressure increases when the tires are used, and for this reason, following the vehicle and tire brands’ recommendation is crucial. Typically, if the recommended pressure levels are 35, then the tires should not use more than 40 psi. More than that will result in the before mentioned problems.
Which tyre is best for a van?
Type-c van tyres Van tyres are designed to deal with heavy loads and very frequent use. The sidewalls are especially reinforced and sometimes have the C marking, e. R15C 104/102R. A van tyre is specifically engineered for heavier loads and hard use, fitting a normal car tyre on a van could be unsafe and even illegal . In fact, UK regulations mandate that vans and light commercial vehicles be equipped with “C” marked tyres (tyres designed for commercial use with higher load capacity).While car tyres are designed to be used on the road, tyres for vans are built to withstand harsher unpaved and uneven terrains. Due to their reinforced design, van tyres can be slightly more expensive than standard car tyres.