What does 96V mean on a tire?
Take, for instance, the designation ’96V’ found on many tires. This combination reveals important information about load capacity and speed rating. The number ’96’ refers to the tire’s load index. Specifically, it indicates that this tire can support up to 710 kg (or approximately 1565 lbs) when properly inflated. The difference between 96V and 96W tires mainly lies in the maximum speed they can handle. The markings 96V and 96W on the side of the tire indicate that 96 represents the load index of a single tire, corresponding to an actual load capacity of 710kg.The main difference between 96H and 96V tyres is their speed rating – 96H tyres are rated for 210km/h while 96V tyres can handle 240km/h, though both can carry the same maximum load of 615kg per tyre.
What does 235 40R19 92V mean?
Tires for your tire size 235/40R19 92V The 235/40R19 92V tire has the following features: the first three digits 235 refer to the width of the tire in millimetres. The second two-digit number 40 refers to the ratio between the height of the sidewall and the width of the tire. If you want better fuel savings, a smoother ride, and a lower price, 225 tires are a smart choice for daily driving on highways or in the city. But if you drive a truck or SUV and need more grip, stronger cornering, and off-road confidence, 235 tires are a better fit.The 235 tires provide more grip and control when cornering or driving on unpaved roads.The 235 tires provide more grip and control when cornering or driving on unpaved roads.If you’re driving a sports sedan or coupe and want both style and serious performance, these 235/40R19 tires are exactly what you need. The low profile design looks absolutely killer on your vehicle while delivering thrilling driving dynamics.
What is the meaning of 95V in tyres?
These two numbers combined determine your tyre’s real limitations. For example, a tire may be stamped 95V, 95 is the load capacity and V is the speed capacity. Here’s a breakdown of how it works: Tire Width: The first number in the tire size (like 245/40R18) represents the tire’s width in millimeters. Aspect Ratio: The second number (40, in this example) is the aspect ratio. This percentage indicates the height of the tire’s sidewall relative to its width.For example, see that 265 mm is wider by 30 mm than 235 mm, indicating the difference in width of both tires.
What does 40R stand for?
The size of jacket corresponds closely to your actual chest measurement (ie a size 40r is to fit a 40 chest) . The Jacket fitting or height is indicated by the letter after the chest size. In this example by the letter “r” which stands for regular fitting. Suit Measurements & Size Chart Fit matters. Suit and sport coat sizes have one number and one letter (for example, 38S, 40R, 42L). The number is your chest measurement and the letter refers to the jacket’s length ‘ short, regular or long.Here’s the clean way to think about it: the number (like 40) is your chest size. The letter is the suit’s length category. So 40S / 40R / 40L are the same “width,” but built for different heights and body proportions.For example, M size t-shirt number often equals 38–40 inches chest size, while L size t-shirt number is 41–43 inches.
What does 40 R mean on a tire?
This is aspect ratio, which shows the sidewall height in percent of the tire width. The aspect ratio of 40% means the height of the sidewall is 40 percent of 225 mm, and this makes the tire to be low profile. R18: “R” stands for radial contruction which is the conventional construction type. UK, where any tyre with an aspect ratio below 45 is classed as a thin tyre. Tyre profiles are expressed as a percentage of the tyre’s width – for example, in a 225/40R18 specification, the ’40’ means the sidewall height is 40% of the 225mm tread width.Replacing low-profile tyres with normal tyres typically involves selecting a smaller wheel diameter and a tyre with a higher aspect ratio (sidewall height).